Technical parameter：

Dimensions	5600mm×886mm×2000mm(length, width and height)
Pass width	573mm
Entry and exit height	860mm
Pre-wash pump	Power: 2.2KW Flow: 950 L/min
main cleaning pump	Power: 2.2KW Flow: 950L/min
rinse pump	Power: 2.2KW Flow: 950 L/min

 

 

 

 

 

 

Installation requirements:

Rated electrical power	65kw
power supply	380v 50hz
Power cord (three-phase five-wire system)	5core 10MM2
Inlet pipe diameter	ф25mm
Drain diameter	Ф32mm
Inlet water pressure (flow pressure)	0.2-0.5MPA
Inlet water temperature	Normal temperature -60℃
Outlet diameter	Ф50mm

 

 

 

 

 

 

 

 

Features:

1. The 10.1-inch LCD touch screen displays various programs, operating stages, temperatures and machine faults.

2. The standard configuration of this product is mainly composed of six parts: input, pre-wash, main wash, rinsing, drying and output, and each part is a modular design;

The combined cleaning system using standard modules is very flexible, and modules can be added or reduced arbitrarily according to the actual situation of the user.

3. Reasonable waterway design to achieve water saving and high efficiency, and the water consumption is only 500L/hour;

4. The pre-wash water tank and the main cleaning water tank are equipped with heating function and temperature control device, so as to adjust the water temperature to achieve the best cleaning effect;

5. The conveying device adopts frequency conversion speed regulation, and the conveying chain speed can be adjusted from 0-4 m/min to meet the cleaning requirements under different conditions;

6. The pre-cleaning, main cleaning and rinsing parts are equipped with a multi-row array nozzle cleaning system, which can obtain the best cleaning effect; the conveyed cleaning frame can be adjusted and replaced, which can be suitable for cleaning of various sizes of utensils;

7. There are wide detachable panels on both sides of the tunnel, which are convenient for maintenance and cleaning; adopt the design of convenient and detachable nozzles.

8. The RS232 interface can download programs, which is convenient for engineers to diagnose faults and user programming.

9. One-button operation, simple and convenient; multiple customizable stored program groups.

10. Equipped with imported liquid level control sensor to prevent the lack of water and cleaning agent in the cleaning tank.

11. Two PT100 temperature sensors are equipped as standard to provide water heating and air temperature display respectively.

12. Automatic fault diagnosis program, the buzzer automatically alarms, and the screen will display fault information when the instrument fails, prompting the location of the problem and facilitating the engineer to provide maintenance; the instrument also prompts warning information to prompt the user to deal with it in time.

13. Provide 93℃ thermal sterilization in accordance with the international standard EN ISO 15883-1/2.

14. It can be connected to a variety of water sources such as cold water, hot water or deionized water. The connected cold water, hot water or deionized water can enter water from different water sources according to the program design, speed up cleaning and save energy.

15. The exterior is made of 304 brushed stainless steel, which is beautiful, wear-resistant and corrosion-resistant. The cabin is made of AISI 316L stainless steel welded and formed. The stainless steel cabin has rounded corners and slope bases without welding design, and there are no dead corners to avoid dirt residue and bacteria generation.

16. Each cleaning part is equipped with three layers of stainless steel filters as standard, which can effectively retain dirt and prolong the life of the pump. The cleaning cabin filter is equipped with a pull-up structure, which is convenient for users to clean.

17. Standard HEPA filter, clean and dry air.

18. Touch screen operation, optional USB port, can be inserted into the U disk to record various control parameters in the cleaning process in real time, and can export the text format to the computer, which is convenient for the laboratory to record the cleaning process.

19. PC remote connection control technology, remote modification of cleaning parameters, to achieve cleaning and isolation of laboratory dangerous goods.

20. Optional printing module, after the cleaning is completed, the cleaning data of each step will be automatically printed.